Ultrasonic Testing Inspector Needed - Quality Support Services : Job Details

Payrate: $26.00/hr, - $35.00/hr plus. + plus $10.00/hr per diemMUST PASS DRUG AND BACKGROUND CHECK.Position Summary:An ultrasonic testing inspector is responsible for conducting non-destructive testing (NDT) using ultrasonic waves to inspect, measure, and evaluate materials and structures for internal flaws, thickness, and other properties without causing damage. They operate ultrasonic examination equipment and other units required for testing and inspection. Key responsibilities include performing comprehensive NDT inspections, interpreting inspection results, adhering to safety protocols, and maintaining high-quality standards.Qualifications:1. Confined Space Entry trained in accordance with OSHA Standards 29 CFR 1915, Subpart B. 2. Hazard Communication trained in accordance with OSHA Standard 29CFR 1915.1200 (1910.1200) (h) - (1) through (3) (iv). 3. Respirator trained and qualified. A Respirator Medical Clearance Examination as required by a Physician. The Respirator Training and Fit Testing will meet the requirements of Standard 29CFR1910.134 and each individual shall be trained in half-face and full-face negative-pressure respirators, MSA COMFO CLASSIC and MSA Ultra-Twin (with MSA approved vapors and dust filter cartridges to be provided for them respirators by the LLPC). Newport News requires the use of a MSA COMFO CLASSIC (approximate weight 12 oz.) and MSA Ultra-Twin (approximate weight 1.5 lbs.) negative-pressure respirators only. Daily use of respirator may occur. 4. Fall Protection/4-D Body Harness-Vertical & Horizontal Lifelines-Beam Clamp trained and qualified in accordance with the following OSHA Regulations; 29CFR1915.159, 29CFR1915.71 (j) (3), 29CFR1915.73 (d), and 29CFR1915.77 (c). Newport News highly recommends the vest-donning type of body harness instead of the step-into-type body harness, with D-Ring in the back. Individuals must be trained (which includes having donned the body harness and demonstrated practical use of the vertical & horizontal lifelines and beam clamp) with the same type fall protection equipment that they are expected to wear on Newport News premises or on off-site Newport News work locations. Body Harness and Vertical & Horizontal Lifelines and Beam Clamps Systems shall comply with the requirements of ANSI Z359.1. NNS may require 60' Self Retracting Lifelines that are Leading Edge compliant and a Quick Grab. NNS uses the FallTech DuraTech Edge SRL-LE. NNS uses the Miller Rope Grab. This rope grab must fit 5/16 carbon steel wire rope. 5. Personal Protective Equipment (PPE*) trained in accordance with OSHA Standards 29CFR 1915 Subpart I and Hearing Conversation 29CFR 1910.95 (i) (j) (k) (l). 6. Non-prescription and prescription safety glasses must meet the requirements of ANSI Z87, with permanently attached side shields. 7. Hard Hats must be white in color with the Leased Labor Provider Company's name on the front of the hard hat. 8. Hearing protection must be of the muff type (banded or mounted) and must have been trained on their use. Newport News uses the Silenta-NF banded muffs and North Com-fit ear plugs. 9. Audiometric testing which documents proof of individual worker's hearing function. The Leased Labor Provider Company shall ensure those individuals performing audiometric testing meet requirements listed in OSHA Regulation 29CFR1910.95 (g) (3) and that the audiometric test results are fully explained to each individual by the testing firm. The individual shall sign the test reports as proof of having received verbal communication of the test results. 10. The physical work effort expected is demanding. The temperature and humidity extremes that may be encountered are the result of ambient temperature and humidity levels in the work area. PPE training means general requirements, eye and face protection, head protection, foot protection, hand and body protection, hearing protection, and body harness-personal fall arrest systems (PFAS) and position device systems.Preferred Qualifications: Possess the ability to inspect confined spaces, stooping, bending, crawling, and climb when required. Demonstrated basic computer skills are required. Ability to read a blueprint. LANGUAGE SKILLS:

• Ability to read and comprehend simple instructions, short correspondence, and memos
• Ability to write simple correspondence

MATHEMATICAL SKILLS:

• Ability to add, subtract, multiply, divide, and measure using the metric system

REASONING ABILITY:

• Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form
• Ability to deal with problems that may arise in certain situations

SAFETY:Must comply with company, federal, state, and local safety and environmental rules and regulations while performing daily job tasks.